广州刂饶实业投资有限公司

Use the setup instructions:

Stopwatch set use:

1. under the normal time display, press MODE key at a time, will see the state of a stopwatch, press the START button (right) once again and START the time, need to stop press START button once again, to continue again press the START button. To zero in time, in a stopwatch to stop state, click the SPLIT button (left) will be zero to timing.

2. set the alarm time: in the normal time display, according to the second MODE key, set the alarm time will see into the state, then press the START button (right) to START adjusted continuously, click the SPLIT button (left), will be transferred to the points. Hold down the left and right click once to cancel the alarm clock function.

3. time Settings: under the normal time display, press MODE key three times, you will see number of seconds in a flash, click the SPLIT button (left), you will see scores in flash, and then press the START button (right) turn score, click the SPLIT button (left) will see hours in flash, and then press the START button (right) the hours set, click the SPLIT button (left) will see days in flash, and then press the START button (right) stay tuned, all such operations such as the months and weeks after all set, press MODE key to exit Use button batteries a grain AG10 button batteries (table there is a grain).

Instructions on the box English description Product use: a total of three adjustment buttons are widely used in learning set lunch. Beauty. Clay pot hot plate burning... Time setting, etc. Product features: precision calculated in seconds. Maximum capacity for 99 minutes and 59 seconds.

Method of use:

1: press the M key sets the position of "points" referred to.

2: press the S key sets the position of "seconds" referred to.

3: according to the M and S keys at the same time shows zero reset.

4: press the START/STOP key to START or STOP by that time.

5: when setting the time there was an alarm to "zero" s last.

6: press any key to stop the alarm.

Batteries made in:

1: when the timer display is not clear or sound less to replace the electricity pool

2: using G13 model electronic buttons.

3: a slide open the battery door. Remove the old battery. Distinguish put in new battery is negative. The battery door back to its original position.